USB Solar Panel Battery Regulator Charge Intelligent Controller (12/24 V, 10 A)

Features

1. Build-in industrial microcontroller.
2. One-key setting, LCD display, auto memory function.
3. 3-stage PWM charge management.
4. Built-in circuit protection, reverse protection, over-load protection.
5. Dual MOS Reverse current protection, low heat production.

Parameters

1. Color: Black
2. Size: 150 mm x 78 mm x 35 mm
3. Rated Voltage: 12 V / 24 V
4. Current: 10 A
5. Standby current: < 10 mA
6. USB Output Voltage: 5 V / 3 A
7. Operating temperature: -35 ℃ ~ +60 ℃
8. Application: Camping / Hiking
9. With Timer and light sensors, it could work for a solar light system.

Instructions  

1. Make sure your battery has enough voltage for the controller to recognize the battery type before the first installation.
2. In order to minimize loss, the battery cable should be as short as possible.
3. The regulator is only suitable for Lead Acid Batteries: GEL, AGM, and OPEN. It is not suited for Lithium Ions, Nickel Metal Hydride, or other Batteries.
4. The charge regulator is only suitable for regulating solar modules. Do not connect another charging source to the charge regulator.

Connection

1. Connect the battery to the charge regulator. It will show 1, if it detects 12 V battery, 2 if it detects 24 V battery.
2. Connect the photovoltaic module to the regulator.
3. Connect the consumer to the charge regulator.